Hi mate, I'm getting the same setup and although its a bit last minute, I wondered if the track is altered at all? by this I mean does the bolting face move inward or outward at all, front or rear?
Reason I ask is I'm having 15" splitrims made for this car and whilst I had decided on offsets for a standard 2.8, I just about have time to change them if I need to. thanks
Another question about Tonys brakes...
Moderators: phpBB2 - Administrators, Moderators
-
- Contributor
- Posts: 21
- Joined: Fri May 23, 2008 10:47 pm
-
- Site Admin & Owner
- Posts: 604
- Joined: Sun Jan 21, 2007 7:59 pm
- Location: Compton, Nr Newbury, Berkshire Drives: Supercharged 4.6 efi V8 Capri
- Contact:
the track front and rear is wider by the width of the disc,
around 8mm each side.
around 8mm each side.
Regards Tony C (COOPS)
MS2 V3.57 Ecu mapable efi and wasted spark ignition.
Rotrex C38-91 supercharger and Cossie RS500 Intercooler @ 14psi of Boost.
Sponsored by: www.extraefi.co.uk & www.interpart.biz & www.caprisport.com
Web site: http://www.capriracing.co.uk
MS2 V3.57 Ecu mapable efi and wasted spark ignition.
Rotrex C38-91 supercharger and Cossie RS500 Intercooler @ 14psi of Boost.
Sponsored by: www.extraefi.co.uk & www.interpart.biz & www.caprisport.com
Web site: http://www.capriracing.co.uk
-
- Contributor
- Posts: 21
- Joined: Fri May 23, 2008 10:47 pm