I like the sound of reduced understear, and not knocking the out side corners off my tyres in 6 months but what are the pitfalls and hows it done properly? what might it cost on a 2.8i? would it widen the track?
Also, are any type of spacers ok? (if i needed them to widen the back to match) I see inch thick ones that bolt to the hub and have seperate holes for the wheel studs - all steel, hubcentric - good/safe enough?
Thanks
Front camber adjustment and spacers
Moderators: phpBB2 - Administrators, Moderators
-
- Contributor
- Posts: 21
- Joined: Fri May 23, 2008 10:47 pm
-
- Site Admin & Owner
- Posts: 604
- Joined: Sun Jan 21, 2007 7:59 pm
- Location: Compton, Nr Newbury, Berkshire Drives: Supercharged 4.6 efi V8 Capri
- Contact:
Caprisport maybe able to help you on this matter,
Regards Tony C (COOPS)
![Image](http://www.v8forum.co.uk/images/forumimages/siggypic.gif)
MS2 V3.57 Ecu mapable efi and wasted spark ignition.
Rotrex C38-91 supercharger and Cossie RS500 Intercooler @ 14psi of Boost.
Sponsored by: www.extraefi.co.uk & www.interpart.biz & www.caprisport.com
Web site: http://www.capriracing.co.uk
![Image](http://www.v8forum.co.uk/images/forumimages/siggypic.gif)
MS2 V3.57 Ecu mapable efi and wasted spark ignition.
Rotrex C38-91 supercharger and Cossie RS500 Intercooler @ 14psi of Boost.
Sponsored by: www.extraefi.co.uk & www.interpart.biz & www.caprisport.com
Web site: http://www.capriracing.co.uk
Re: Front camber adjustment and spacers
Adjustable track arms and set the tracking to suit - simple as thatJanspeedcapri wrote:I like the sound of reduced understear, and not knocking the out side corners off my tyres in 6 months but what are the pitfalls and hows it done properly? what might it cost on a 2.8i? would it widen the track?
Also, are any type of spacers ok? (if i needed them to widen the back to match) I see inch thick ones that bolt to the hub and have seperate holes for the wheel studs - all steel, hubcentric - good/safe enough?
Thanks
If your wheels are the correct off-set, you don't want to be getting involved with spacers.
![Image](http://i126.photobucket.com/albums/p105/caprisport/sig3.jpg)
Just some of what we do