Front camber adjustment and spacers

General Chat About Brakes, Wheels & Suspension

Moderators: phpBB2 - Administrators, Moderators

Post Reply
Janspeedcapri
Contributor
Contributor
Posts: 21
Joined: Fri May 23, 2008 10:47 pm

Front camber adjustment and spacers

Post by Janspeedcapri »

I like the sound of reduced understear, and not knocking the out side corners off my tyres in 6 months but what are the pitfalls and hows it done properly? what might it cost on a 2.8i? would it widen the track?

Also, are any type of spacers ok? (if i needed them to widen the back to match) I see inch thick ones that bolt to the hub and have seperate holes for the wheel studs - all steel, hubcentric - good/safe enough?
Thanks



Coops
Site Admin & Owner
Site Admin & Owner
Posts: 604
Joined: Sun Jan 21, 2007 7:59 pm
Location: Compton, Nr Newbury, Berkshire Drives: Supercharged 4.6 efi V8 Capri
Contact:

Post by Coops »

Caprisport maybe able to help you on this matter,
Regards Tony C (COOPS)
Image
MS2 V3.57 Ecu mapable efi and wasted spark ignition.
Rotrex C38-91 supercharger and Cossie RS500 Intercooler @ 14psi of Boost.
Sponsored by: www.extraefi.co.uk & www.interpart.biz & www.caprisport.com
Web site: http://www.capriracing.co.uk

csr
Forum Sponsor
Forum Sponsor
Posts: 273
Joined: Wed Jan 24, 2007 8:47 pm

Re: Front camber adjustment and spacers

Post by csr »

Janspeedcapri wrote:I like the sound of reduced understear, and not knocking the out side corners off my tyres in 6 months but what are the pitfalls and hows it done properly? what might it cost on a 2.8i? would it widen the track?

Also, are any type of spacers ok? (if i needed them to widen the back to match) I see inch thick ones that bolt to the hub and have seperate holes for the wheel studs - all steel, hubcentric - good/safe enough?
Thanks
Adjustable track arms and set the tracking to suit - simple as that

If your wheels are the correct off-set, you don't want to be getting involved with spacers.
Image
Just some of what we do

Janspeedcapri
Contributor
Contributor
Posts: 21
Joined: Fri May 23, 2008 10:47 pm

Post by Janspeedcapri »

Thanks chaps.

Post Reply