handbrake cable for 280 system

General Chat About Brakes, Wheels & Suspension

Moderators: phpBB2 - Administrators, Moderators

Post Reply
ugly
Newbie
Posts: 22
Joined: Mon Sep 08, 2008 8:53 pm

handbrake cable for 280 system

Post by ugly »

hi bought a modified handbrake cable from c/s can some one please tell me how to fit it. i keep hearing something about drilling a hole in the lever?
:?



csr
Forum Sponsor
Forum Sponsor
Posts: 273
Joined: Wed Jan 24, 2007 8:47 pm

Post by csr »

No -

It will fit the lever perfectly. The only thing you will need to do is
anchor the second side.

Get the calipers on and working

fit the cable to the lever and the adjuster in the original anchor

Connect to the calipers both sides and hold the cable in place

You should now see where the 2nd anchor needs to go
(not dead opposite the original but somewhere near)

Do not fit it in the tunnel, the prop will hit it.
It goes on the horizontal surface close to the exhaust.

Just in case - the calipers go on with the cable fitting to the rear.
Image
Just some of what we do

ugly
Newbie
Posts: 22
Joined: Mon Sep 08, 2008 8:53 pm

Post by ugly »

thanks mate,
will fit that next weekend.

Post Reply