2.8 springs on lazer

General Chat About Brakes, Wheels & Suspension

Moderators: phpBB2 - Administrators, Moderators

Post Reply
jimbob
Newbie
Posts: 1
Joined: Thu Mar 27, 2008 7:16 pm
Location: ireland

2.8 springs on lazer

Post by jimbob »

Iv come upon a (free) brand new set of 2.8 springs and am wondering if its a good idea to fit them to my Lazer? Will it stiffen things up? will it lower the front and if so how much should i lower the rear to suit? Will it effect my handling? Top forum folks and i think Caprisport should consider setting up shop in Ireland.....!



Coops
Site Admin & Owner
Site Admin & Owner
Posts: 604
Joined: Sun Jan 21, 2007 7:59 pm
Location: Compton, Nr Newbury, Berkshire Drives: Supercharged 4.6 efi V8 Capri
Contact:

Post by Coops »

one thing i recon will eb a problem is,
the 2.8i is a cast v6,
the laser a cast 4 pot, the springs may sit the front up to high due to the light weight laser engine,
Regards Tony C (COOPS)
Image
MS2 V3.57 Ecu mapable efi and wasted spark ignition.
Rotrex C38-91 supercharger and Cossie RS500 Intercooler @ 14psi of Boost.
Sponsored by: www.extraefi.co.uk & www.interpart.biz & www.caprisport.com
Web site: http://www.capriracing.co.uk

csr
Forum Sponsor
Forum Sponsor
Posts: 273
Joined: Wed Jan 24, 2007 8:47 pm

Post by csr »

You need to know a bit more about the springs.

I don't believe that they are original 2.8
They will be new to suit the rates and lengths for the 2.8

If you can find out the figures, let me know, they might be fine.

We do get interest from Ireland but shipping costs more and (sweeping
generalisation here) the Irish can be a bit hard work to deal with.

Is there something we can help you with?
Image
Just some of what we do

Post Reply