Hi gang,
Well the mk3 is nearly on the road at long last, but while i was changing the rear brake pads over the weekend i noticed that the back passenger side pads where covered in oil. it's not the cylinder so is the an oil seal behind the hub, behind that plate thats held in with 4 bolts?
I've no idea, so i thought i better ask you guys before i start pulling bit off.
Thanks
ocj
oil leak at rear wheel.
Moderators: phpBB2 - Administrators, Moderators
-
- Site Admin & Owner
- Posts: 604
- Joined: Sun Jan 21, 2007 7:59 pm
- Location: Compton, Nr Newbury, Berkshire Drives: Supercharged 4.6 efi V8 Capri
- Contact:
you can do the bearings yourself, but take care when cutting the old inner race off,
you will need a hefty bit of long pipe to use as a slide hammer for knocking the bearing on,
I had mine done by caprisport as they do this with the eyes closed (done so many)
the axle breather is on the top of one of the axle tubes between the diff and the wheel. it is a plastic breather
you will need a hefty bit of long pipe to use as a slide hammer for knocking the bearing on,
I had mine done by caprisport as they do this with the eyes closed (done so many)
the axle breather is on the top of one of the axle tubes between the diff and the wheel. it is a plastic breather
Regards Tony C (COOPS)
MS2 V3.57 Ecu mapable efi and wasted spark ignition.
Rotrex C38-91 supercharger and Cossie RS500 Intercooler @ 14psi of Boost.
Sponsored by: www.extraefi.co.uk & www.interpart.biz & www.caprisport.com
Web site: http://www.capriracing.co.uk
MS2 V3.57 Ecu mapable efi and wasted spark ignition.
Rotrex C38-91 supercharger and Cossie RS500 Intercooler @ 14psi of Boost.
Sponsored by: www.extraefi.co.uk & www.interpart.biz & www.caprisport.com
Web site: http://www.capriracing.co.uk