wheels

General Chat About Brakes, Wheels & Suspension

Moderators: phpBB2 - Administrators, Moderators

Post Reply
tom mates
Newbie
Posts: 7
Joined: Sun Nov 29, 2009 4:00 pm
Location: West Midlands

wheels

Post by tom mates »

hello all
i,m after some advice, i want to run my 2.9 cossy powerd mk 3 on 14 or 15" steel wheels, can i used sierra or mondeo wheels with out spacers or will i have to resort to using whhels from another manufacturer?

cheers

Tom



Coops
Site Admin & Owner
Site Admin & Owner
Posts: 604
Joined: Sun Jan 21, 2007 7:59 pm
Location: Compton, Nr Newbury, Berkshire Drives: Supercharged 4.6 efi V8 Capri
Contact:

Post by Coops »

i'll ask some questions and get back to you mate,
Regards Tony C (COOPS)
Image
MS2 V3.57 Ecu mapable efi and wasted spark ignition.
Rotrex C38-91 supercharger and Cossie RS500 Intercooler @ 14psi of Boost.
Sponsored by: www.extraefi.co.uk & www.interpart.biz & www.caprisport.com
Web site: http://www.capriracing.co.uk

Coops
Site Admin & Owner
Site Admin & Owner
Posts: 604
Joined: Sun Jan 21, 2007 7:59 pm
Location: Compton, Nr Newbury, Berkshire Drives: Supercharged 4.6 efi V8 Capri
Contact:

Post by Coops »

sierra and mondeo have the wrong offset and spacers will be needed to run theses wheels, sorry.

contact a few wheel suppliers to see whats available in the steel wheel range.
Regards Tony C (COOPS)
Image
MS2 V3.57 Ecu mapable efi and wasted spark ignition.
Rotrex C38-91 supercharger and Cossie RS500 Intercooler @ 14psi of Boost.
Sponsored by: www.extraefi.co.uk & www.interpart.biz & www.caprisport.com
Web site: http://www.capriracing.co.uk

tom mates
Newbie
Posts: 7
Joined: Sun Nov 29, 2009 4:00 pm
Location: West Midlands

wheels

Post by tom mates »

thanks for the help mate..(and on previous posts)

i am going for peugeot 406 15inch steels, the stud pattern is the same offset not far off the only major difference is the bore size is bigger, so i,ll get some spigot rings off ebay, or get some made up at a machine shop

Tom

Coops
Site Admin & Owner
Site Admin & Owner
Posts: 604
Joined: Sun Jan 21, 2007 7:59 pm
Location: Compton, Nr Newbury, Berkshire Drives: Supercharged 4.6 efi V8 Capri
Contact:

Post by Coops »

im running pug wheels on my cappa too mate :wink:
Regards Tony C (COOPS)
Image
MS2 V3.57 Ecu mapable efi and wasted spark ignition.
Rotrex C38-91 supercharger and Cossie RS500 Intercooler @ 14psi of Boost.
Sponsored by: www.extraefi.co.uk & www.interpart.biz & www.caprisport.com
Web site: http://www.capriracing.co.uk

JaneFox
Newbie
Posts: 1
Joined: Wed Apr 27, 2016 8:47 am
Location: Australia
Contact:

Post by JaneFox »

Me , for example, prefer to use wheels of the same manufacturer! :P
All my life is connected with cars, beginning from childhood I repair them with my dad!)

Post Reply