Roll bar bush sizes

mfw898y · Post by **mfw898y** » Tue Feb 13, 2007 9:04 pm

May have dropped a B@@@@ock ordering anti roll bar bushes

(bar to chassis mount) Just found out theres more than one size for front roll bar bushes. Its an 86' 1.6 laser. Does anyone know what the correct size is or how to measure it (outer dia/inner dia)?
Also are these easy enough to fit without removing bar completely. i.e do one side at a time?

mfw898y · Post by **mfw898y** » Thu Feb 15, 2007 7:51 pm

Post by **Coops** » Thu Feb 15, 2007 11:00 pm

i think the laser anti roll bars are 24mm mate

mfw898y · Post by **mfw898y** » Fri Feb 16, 2007 7:18 pm

Thankyou

csr · Post by **csr** » Sun Feb 18, 2007 6:55 pm

If the bar is original - it's 22mm on the 1.6

A 2 litre Laser has the 24mm bar.

Obviously, it's the outside diameter of the bar.

mfw898y · Post by **mfw898y** » Sun Feb 18, 2007 10:43 pm

Cheers. I meant inner or outer diameter of bush. Seems strange how it differs between 1.6 and 2.0. Thanx for advice!!!

csr · Post by **csr** » Mon Feb 19, 2007 8:43 pm

all Lasers and 2.8's have the same outer dimmensions on the bushes.