24v engine electrics
Moderators: phpBB2 - Administrators, Moderators
24v engine electrics
Question 2 is regarding the oil pressure and temperature guage, please can you explain what needs to be done to modify these. thanks
Swap the temp sender to the one that goes with the guage.
You will need a late 2.8 rev counter - one with a white base.
There is a green wire from the EDIS module for the rev counter.
Connect where the green coil- wire went.
Oil guage - swap the fitting off the 2.8 engine.
As simple as it sounds.
You will need a late 2.8 rev counter - one with a white base.
There is a green wire from the EDIS module for the rev counter.
Connect where the green coil- wire went.
Oil guage - swap the fitting off the 2.8 engine.
As simple as it sounds.
Just some of what we do