24v engine electrics

Please let us know here of any parts needed to fit other engines into Capri shells, and any other modifications needed,

Moderators: phpBB2 - Administrators, Moderators

Post Reply
Ian P
Newbie
Posts: 6
Joined: Wed Apr 14, 2010 6:35 pm

24v engine electrics

Post by Ian P »

Question 2 is regarding the oil pressure and temperature guage, please can you explain what needs to be done to modify these. thanks



Ian P
Newbie
Posts: 6
Joined: Wed Apr 14, 2010 6:35 pm

Post by Ian P »

sorry, the rev counter, not the temp gague, presumably the temp sender for the 2.8 can be used.

csr
Forum Sponsor
Forum Sponsor
Posts: 273
Joined: Wed Jan 24, 2007 8:47 pm

Post by csr »

Swap the temp sender to the one that goes with the guage.

You will need a late 2.8 rev counter - one with a white base.

There is a green wire from the EDIS module for the rev counter.
Connect where the green coil- wire went.

Oil guage - swap the fitting off the 2.8 engine.
As simple as it sounds.
Image
Just some of what we do

Ian P
Newbie
Posts: 6
Joined: Wed Apr 14, 2010 6:35 pm

Post by Ian P »

Thanks, much appreciated.

Post Reply