hi there, im fitting the 24v v6 cosworth engine, and have also fitted the capri sport 260 brake kit, which uses the 2liter laser GL servo.. iv droped the engine in and have found that the cam cover bolt at the back is touching the servo. as you can see from the pictures.. have anyone else had this problem??.
24V V6 Cosworth / Capri Sport 260 Kit, Servo Proplem
Moderators: phpBB2 - Administrators, Moderators
-
- Newbie
- Posts: 5
- Joined: Mon Apr 26, 2010 10:26 pm
-
- Newbie
- Posts: 1
- Joined: Thu May 01, 2014 9:13 pm
- Location: United Kingdom
I have had exactly this "problem"! I found that if I adjusted the height of the gearbox at the gearbox crossmember, I could get maybe 2-3mm clearance between said bolt and servo. I was still worried that this wouldn't be enough but once I fired it up, no problem. Have given it some beans on the road, and no apparent issues.
Hope this helps and hope you see this (or have already sorted it!).
Regards,
Dave.
Hope this helps and hope you see this (or have already sorted it!).
Regards,
Dave.