Sourcing replacment panels (mk3)?

General Chat About Body, Interior & Strengthening

Moderators: phpBB2 - Administrators, Moderators

Post Reply
phorbiuz
Newbie
Posts: 6
Joined: Thu Jan 25, 2007 9:45 am
Location: St Helens

Sourcing replacment panels (mk3)?

Post by phorbiuz »

Hi

My quickie resto has turned into a bigger job (don't they always). After closer inspection I reckon I'll need a battery tray, front valance, and both headlamp bowls. Now for the question: Where's a good place to get these replacement panels? I see Ex-Pressed Panels can supply these at £48, £306, £85, and £85 respectively, but that seems a little steep.

Anyone any suggestions?

Thanks in advance.


Everything's easy, when you know how it's done!

ToGGoT
Newbie
Posts: 5
Joined: Wed Jan 24, 2007 11:22 am

Post by ToGGoT »

Ebay!

ToGGoT
Cosworth 24v Conversion - Want to contribute to the Tyre Fund?

spookie
Newbie
Posts: 42
Joined: Mon Jan 22, 2007 8:40 pm
Location: Cambs

Post by spookie »

Good luck in finding cheap headlamp bowls. I have been looking for ages for genuine ones. They are like rocking horse poo.

Coops
Site Admin & Owner
Site Admin & Owner
Posts: 604
Joined: Sun Jan 21, 2007 7:59 pm
Location: Compton, Nr Newbury, Berkshire Drives: Supercharged 4.6 efi V8 Capri
Contact:

Post by Coops »

hadrain replacement panels,
they dont list every thing you want but i have used there panels and they are good,
Regards Tony C (COOPS)
Image
MS2 V3.57 Ecu mapable efi and wasted spark ignition.
Rotrex C38-91 supercharger and Cossie RS500 Intercooler @ 14psi of Boost.
Sponsored by: www.extraefi.co.uk & www.interpart.biz & www.caprisport.com
Web site: http://www.capriracing.co.uk

Post Reply