Page 1 of 1

REMOVAL OF RUBBER SIDE MOULDINGS

Posted: Thu Jan 24, 2008 5:50 pm
by CHRISB
I AM BUYING A 86 CAPRI THAT I WANT TO MAKE INTO A 3.0S.I NEED TO REMOVE THE RUBBER SIDE MOULDINGS TO DO THIS.ARE THESE STUCK ON OR CLIPPED AND WILL REMOVING THEM LEAVE HOLES

Posted: Sat Jan 26, 2008 9:46 pm
by Coops
they are held on with clips on the doors and leave metal stubs on the doors that the clips fit onto,
the rear and front mouldings will leave holes in the panels mate,