REMOVAL OF RUBBER SIDE MOULDINGS
Moderators: phpBB2 - Administrators, Moderators
REMOVAL OF RUBBER SIDE MOULDINGS
I AM BUYING A 86 CAPRI THAT I WANT TO MAKE INTO A 3.0S.I NEED TO REMOVE THE RUBBER SIDE MOULDINGS TO DO THIS.ARE THESE STUCK ON OR CLIPPED AND WILL REMOVING THEM LEAVE HOLES
-
- Site Admin & Owner
- Posts: 604
- Joined: Sun Jan 21, 2007 7:59 pm
- Location: Compton, Nr Newbury, Berkshire Drives: Supercharged 4.6 efi V8 Capri
- Contact:
they are held on with clips on the doors and leave metal stubs on the doors that the clips fit onto,
the rear and front mouldings will leave holes in the panels mate,
the rear and front mouldings will leave holes in the panels mate,
Regards Tony C (COOPS)
MS2 V3.57 Ecu mapable efi and wasted spark ignition.
Rotrex C38-91 supercharger and Cossie RS500 Intercooler @ 14psi of Boost.
Sponsored by: www.extraefi.co.uk & www.interpart.biz & www.caprisport.com
Web site: http://www.capriracing.co.uk
MS2 V3.57 Ecu mapable efi and wasted spark ignition.
Rotrex C38-91 supercharger and Cossie RS500 Intercooler @ 14psi of Boost.
Sponsored by: www.extraefi.co.uk & www.interpart.biz & www.caprisport.com
Web site: http://www.capriracing.co.uk