REMOVAL OF RUBBER SIDE MOULDINGS

General Chat About Body, Interior & Strengthening

Moderators: phpBB2 - Administrators, Moderators

Post Reply
CHRISB
Newbie
Posts: 2
Joined: Thu Jan 24, 2008 5:48 pm

REMOVAL OF RUBBER SIDE MOULDINGS

Post by CHRISB » Thu Jan 24, 2008 5:50 pm

I AM BUYING A 86 CAPRI THAT I WANT TO MAKE INTO A 3.0S.I NEED TO REMOVE THE RUBBER SIDE MOULDINGS TO DO THIS.ARE THESE STUCK ON OR CLIPPED AND WILL REMOVING THEM LEAVE HOLES



User avatar
Coops
Site Admin & Owner
Site Admin & Owner
Posts: 604
Joined: Sun Jan 21, 2007 7:59 pm
Location: Compton, Nr Newbury, Berkshire Drives: Supercharged 4.6 efi V8 Capri
Contact:

Post by Coops » Sat Jan 26, 2008 9:46 pm

they are held on with clips on the doors and leave metal stubs on the doors that the clips fit onto,
the rear and front mouldings will leave holes in the panels mate,
Regards Tony C (COOPS)
Image
MS2 V3.57 Ecu mapable efi and wasted spark ignition.
Rotrex C38-91 supercharger and Cossie RS500 Intercooler @ 14psi of Boost.
Sponsored by: www.extraefi.co.uk & www.interpart.biz & www.caprisport.com
Web site: http://www.capriracing.co.uk

Post Reply