does anyone know what parts i'm going to need to upgrade the standard steering to power steering on my 2.0 laser. i know i can get the rack from a 2.8 but its the steering pump, pully and brackets i'm at a loss as to where i'd get them from. can anyone help please
cheers
Paul
power steering 2.0 laser
Moderators: phpBB2 - Administrators, Moderators
You're looking for hens teeth - good luck!
You need -
The front set-up from an OHC Sierra which includes
Alternator, steering pump and the bracket that holds them to the engine.
The cranck pulley
A Sierra OHC water pump & pulley
A matched pair of belts
2.8 rack and cross member
Modified OHC engine mounts
You can get hoses made but getting the original rack and pump
fittings will make it much easier
You need -
The front set-up from an OHC Sierra which includes
Alternator, steering pump and the bracket that holds them to the engine.
The cranck pulley
A Sierra OHC water pump & pulley
A matched pair of belts
2.8 rack and cross member
Modified OHC engine mounts
You can get hoses made but getting the original rack and pump
fittings will make it much easier
Just some of what we do