power steering 2.0 laser

General Chat About Steering.

Moderators: phpBB2 - Administrators, Moderators

Post Reply
paul789
Newbie
Posts: 1
Joined: Mon May 16, 2011 11:04 am
Location: Coventry

power steering 2.0 laser

Post by paul789 »

does anyone know what parts i'm going to need to upgrade the standard steering to power steering on my 2.0 laser. i know i can get the rack from a 2.8 but its the steering pump, pully and brackets i'm at a loss as to where i'd get them from. can anyone help please

cheers
Paul



csr
Forum Sponsor
Forum Sponsor
Posts: 273
Joined: Wed Jan 24, 2007 8:47 pm

Post by csr »

You're looking for hens teeth - good luck!

You need -

The front set-up from an OHC Sierra which includes

Alternator, steering pump and the bracket that holds them to the engine.

The cranck pulley

A Sierra OHC water pump & pulley

A matched pair of belts

2.8 rack and cross member

Modified OHC engine mounts

You can get hoses made but getting the original rack and pump
fittings will make it much easier
Image
Just some of what we do

Post Reply