Capri Technical Forum:

Posted: **Wed Feb 14, 2007 12:43 pm**

Hi all.

I have a set of poly bushes for my Capri, which contains front anti roll bar bushes for a 2.8i roll bar. Can I fit this rollbar with the new bushes to a pinto rack?

Many thanks

Nick

Posted: **Thu Feb 15, 2007 9:48 am**

doesn't touch the rack mate. You can fit the 2.8 FARB to the laser shell using all the original 2.8 fittings... i.e. the 2 clamps at the front. The Track control arms are identical, so the abr will fit straight through.

Posted: **Sat Feb 17, 2007 12:50 am**

right, thanks Col. Not sure if I still have the front brackets off the 2.8i though.

Posted: **Mon Feb 19, 2007 11:39 am**

a lot of lasers had the 24mm FARB from factory... you may be lucky. All the Lasers I have had did have a 24mm FARB.

Posted: **Mon Feb 19, 2007 12:31 pm**

ah righto, Cheers Col

Capri Technical Forum:

Anti rollbar

Anti rollbar