backbox

General Chat About Exhaust, Cylinder Heads, Fuel Systems And Intake.

Moderators: phpBB2 - Administrators, Moderators

Post Reply
retroglam73
Newbie
Posts: 41
Joined: Sun Jan 20, 2008 7:08 pm
Location: Bridlington east yorkshire

backbox

Post by retroglam73 »

does anyone know if the 1300cc backbox is the same shape as the 1600 pinto one?
reason i ask is i cant get one for my 16XL but i can gat one for the 1300, on photo it looks identical , i know the pipe diameter is possibly smaller but i can overcome that ..


'nostalgia.. its a thing of the past'

Coops
Site Admin & Owner
Site Admin & Owner
Posts: 604
Joined: Sun Jan 21, 2007 7:59 pm
Location: Compton, Nr Newbury, Berkshire Drives: Supercharged 4.6 efi V8 Capri
Contact:

Post by Coops »

have you tried mick morgan the mk1 capri guru?
Regards Tony C (COOPS)
Image
MS2 V3.57 Ecu mapable efi and wasted spark ignition.
Rotrex C38-91 supercharger and Cossie RS500 Intercooler @ 14psi of Boost.
Sponsored by: www.extraefi.co.uk & www.interpart.biz & www.caprisport.com
Web site: http://www.capriracing.co.uk

retroglam73
Newbie
Posts: 41
Joined: Sun Jan 20, 2008 7:08 pm
Location: Bridlington east yorkshire

Post by retroglam73 »

yeah mick is always my 1st choice, tried everywhere and there is no mk1 facelift backbox anywhere!
'nostalgia.. its a thing of the past'

capri_lover
Newbie
Posts: 20
Joined: Tue Aug 28, 2007 12:13 am
Location: Yorkshire

Post by capri_lover »

Hi Tony...

Not sure if you're sorted with your exhaust by now (soz for being like a month behind everyone else) but...

I was searching for a new system for mine and came across this site

http://www.leisureshack.co.uk/osb/showi ... apri_11809

Found it helpful cos there's diagrams of complete systems to compare and dont have to dig too deep either... £18 for a Bosal backbox aint too bad is it? :D

Looks like the 1300 is the same shape as the 1600 on there

Hope things are good with ya

~Jenni~

retroglam73
Newbie
Posts: 41
Joined: Sun Jan 20, 2008 7:08 pm
Location: Bridlington east yorkshire

Post by retroglam73 »

Thanks Jenni, the pipes listed on there are for the mk2 which are different to mine, thanks anyway x
'nostalgia.. its a thing of the past'

Post Reply

Return to “Exhaust, Cylinder Heads, Fuel And Intake Area”