Page 1 of 1
Supercharger
Posted: Wed Oct 24, 2007 11:54 pm
by Coops
im thinking about changing my good old induction setup to a forced induction setup. supercharger
has any one done anything like this?
im looking at tips, ideas parts used drawings photo's etc,
the more help and pics that can be found will help me loads guys.
my engine is a rover v8,
im looking at going the eaton m90-m112 chargers,
1 because they are cheap over here,
2 i can't afford a vortec or a paxton
help me out please guys,
Posted: Thu Dec 20, 2007 12:42 pm
by mfw898y
There's a guy posting on youtube with a supercharged 3.9 V8. No doubt his email will be on there and you could get some ideas off him
Not sure if its rover powered, but here's his profile.
http://uk.youtube.com/profile?user=thefatcapri
This may also be of help
http://www.gatorsuperchargers.net/
Posted: Thu Dec 20, 2007 8:10 pm
by Coops
that be my mate Bob
Posted: Thu Dec 20, 2007 10:53 pm
by mfw898y
Compliment him on the motor when you see him! Supercharging is one of the option i've considered on the pinto. There are a couple on youtube. Very distinctive sound...and acceleration
There are plenty of the Eaton ones off the mini that i've been looking at, although i doubt it'd even cause so much as a slight draught through your engine
There seems to be so many different routes to take, although you seem to have covered most of them
Posted: Thu Dec 20, 2007 11:05 pm
by Coops
im slowly working my way through them until i find something i like
Posted: Sun Mar 02, 2008 10:25 pm
by Lennard
I know a guy over here in holland that had a buick 215 ( /rover 3.5 ) that he has a supercharger on
it's in a 73 ( if i remember right ) capri
I don't know what setup he has got on his v8 thoug
I'll ask him when i see him again ( could take some time )
Greetz Lennard
Posted: Sun Mar 02, 2008 11:37 pm
by Coops
cheers mate,