hello all,I'm running a VW T25 crew cab with a Cologne 2.8i fitted,the injection plays up and it suffers over revving when hot ,so I'm thinking of junking the injection and fitting a holley 4-barrel as I think the std 38dgas is to small
anyone else done the same
again....hello all
2.8 cologne - can it run a holley carb ?
Moderators: phpBB2 - Administrators, Moderators
-
- Newbie
- Posts: 24
- Joined: Fri Mar 09, 2007 7:26 pm
A holley 4 barrel is WAAAAAAAAAAAAAAAAY too big for a wee 2.8. You'll get more problems trying to get that to work than repairing your injection system. The 2.8 injection system is normally quite good and is obviously well set up for the 2.8 you have. It'll use less fuel, cost less to fix and require less maintenance than the holley.
What checks have you made with the injection system to find this fault?
What checks have you made with the injection system to find this fault?
-
- Contributor
- Posts: 37
- Joined: Sat Jan 27, 2007 9:20 pm
- Location: 100 miles from smoke city
Must agree putting a holley on a 2.8 might as well put a mini moto carb on it. check out this site for carb aplications.for cfm (cubic feet per minute)
www.corvetteactioncenter.com/tech/tools/carb.htm.
www.corvetteactioncenter.com/tech/tools/carb.htm.
Never Drive Faster That Your Angal Can Fly......