3.1 Essex V6
Posted: Thu Jan 25, 2007 11:48 pm
Good Evening All...
I was wondering can somebody help me out. I'm after buying 3.1 Essex engine which is fitted Kent V62 Cam fitted with standard heads.
I am thinking of fitting stage two heads, ( Inlet Valves Diameter increased to 44mm). If I fit this do you think i will have a problem with the valves hitting the pistons.
Thanks
Mike
I was wondering can somebody help me out. I'm after buying 3.1 Essex engine which is fitted Kent V62 Cam fitted with standard heads.
I am thinking of fitting stage two heads, ( Inlet Valves Diameter increased to 44mm). If I fit this do you think i will have a problem with the valves hitting the pistons.
Thanks
Mike