Good Evening All...
I was wondering can somebody help me out. I'm after buying 3.1 Essex engine which is fitted Kent V62 Cam fitted with standard heads.
I am thinking of fitting stage two heads, ( Inlet Valves Diameter increased to 44mm). If I fit this do you think i will have a problem with the valves hitting the pistons.
Thanks
Mike
3.1 Essex V6
Moderators: phpBB2 - Administrators, Moderators
-
- Site Admin & Owner
- Posts: 604
- Joined: Sun Jan 21, 2007 7:59 pm
- Location: Compton, Nr Newbury, Berkshire Drives: Supercharged 4.6 efi V8 Capri
- Contact:
i had a 3.0 bored to 3.1,
i had a kent V62 cam and pair of Burton stg2 heads on it and i had no problems,
i had a kent V62 cam and pair of Burton stg2 heads on it and i had no problems,
Regards Tony C (COOPS)
MS2 V3.57 Ecu mapable efi and wasted spark ignition.
Rotrex C38-91 supercharger and Cossie RS500 Intercooler @ 14psi of Boost.
Sponsored by: www.extraefi.co.uk & www.interpart.biz & www.caprisport.com
Web site: http://www.capriracing.co.uk
MS2 V3.57 Ecu mapable efi and wasted spark ignition.
Rotrex C38-91 supercharger and Cossie RS500 Intercooler @ 14psi of Boost.
Sponsored by: www.extraefi.co.uk & www.interpart.biz & www.caprisport.com
Web site: http://www.capriracing.co.uk