Fitting Mt75 in a capri

General Chat About Drivetrain.

Moderators: phpBB2 - Administrators, Moderators

Post Reply
Capri24v
Newbie
Posts: 2
Joined: Sat Mar 08, 2008 3:00 pm
Location: Norway

Fitting Mt75 in a capri

Post by Capri24v »

hey
I'm woundering of fitting a MT75 gearbox in my Capri.
and I'm woundering, what kind of modifications do I have to do with the car?
what to do with the gearbox mounting bracket, the prop shaft?



Coops
Site Admin & Owner
Site Admin & Owner
Posts: 604
Joined: Sun Jan 21, 2007 7:59 pm
Location: Compton, Nr Newbury, Berkshire Drives: Supercharged 4.6 efi V8 Capri
Contact:

Post by Coops »

caprisport favours this gearbox highly,
have you checked on the website, not sure if there is anyinfo there regarding fitting the mt75,
other than that drop them an email,
worth a shot.
Regards Tony C (COOPS)
Image
MS2 V3.57 Ecu mapable efi and wasted spark ignition.
Rotrex C38-91 supercharger and Cossie RS500 Intercooler @ 14psi of Boost.
Sponsored by: www.extraefi.co.uk & www.interpart.biz & www.caprisport.com
Web site: http://www.capriracing.co.uk

csr
Forum Sponsor
Forum Sponsor
Posts: 273
Joined: Wed Jan 24, 2007 8:47 pm

Post by csr »

If I'm right, you have these boxes fitted as standard on some cars so you can get them easily.

Yes, work is needed to fit them but it's well worth it.

The gearbox cross member needs work and the top of the tunnel.

The prop shaft front section is also specially made.
Image
Just some of what we do

Capri24v
Newbie
Posts: 2
Joined: Sat Mar 08, 2008 3:00 pm
Location: Norway

Post by Capri24v »

I have a gearbox from a sierra 2.9 2wd.
but what kind om modifications do I have to do with the top of the tunnel?

Post Reply