Ok changed the temp sender on my 2.8i
but still can't get a reading from the temp guage!
have earthed the wires and the temp guage goes to the red(so i'm thinking that the guage is ok)
how can i test the sender unit?
tried putting the old one in boiling water but got no reading
any help would be greatfully appreciated
Stephen
Temp sender problem
Moderators: phpBB2 - Administrators, Moderators
-
- Site Admin & Owner
- Posts: 604
- Joined: Sun Jan 21, 2007 7:59 pm
- Location: Compton, Nr Newbury, Berkshire Drives: Supercharged 4.6 efi V8 Capri
- Contact:
are you sure you got the correct sender?
they usually have a coloured plastic on the top of the sender,
think theres is white, blue etc,
ask CSR he maybe able to throw some light on this,
they usually have a coloured plastic on the top of the sender,
think theres is white, blue etc,
ask CSR he maybe able to throw some light on this,
Regards Tony C (COOPS)
MS2 V3.57 Ecu mapable efi and wasted spark ignition.
Rotrex C38-91 supercharger and Cossie RS500 Intercooler @ 14psi of Boost.
Sponsored by: www.extraefi.co.uk & www.interpart.biz & www.caprisport.com
Web site: http://www.capriracing.co.uk
MS2 V3.57 Ecu mapable efi and wasted spark ignition.
Rotrex C38-91 supercharger and Cossie RS500 Intercooler @ 14psi of Boost.
Sponsored by: www.extraefi.co.uk & www.interpart.biz & www.caprisport.com
Web site: http://www.capriracing.co.uk
Sender part numbers
Found the part numbers which are Intermotor.
52630 listed for 2.8 in some cataloges - it's wrong - has a spade not round terminal and resistance is too high
so will just touch the lower end of the scale if at all.
52750 listed for OHC and loads of other stuff - has the correct round pin and seems to work ok.
52630 listed for 2.8 in some cataloges - it's wrong - has a spade not round terminal and resistance is too high
so will just touch the lower end of the scale if at all.
52750 listed for OHC and loads of other stuff - has the correct round pin and seems to work ok.
Just some of what we do