Flushing the cooling sytem!!!

General Chat About Cooling & Overheating

Moderators: phpBB2 - Administrators, Moderators

Post Reply
b_kennedy
Newbie
Posts: 1
Joined: Sun Jun 15, 2008 11:11 am
Location: Slough

Flushing the cooling sytem!!!

Post by b_kennedy » Mon Jun 16, 2008 8:28 pm

I have just got a capri 2.8 special and the water is brown. I want to flush the water through with a hose but not sure where to put the water in and what pipe to take off to release the crap. Thanks in advance



User avatar
Coops
Site Admin & Owner
Site Admin & Owner
Posts: 604
Joined: Sun Jan 21, 2007 7:59 pm
Location: Compton, Nr Newbury, Berkshire Drives: Supercharged 4.6 efi V8 Capri
Contact:

Post by Coops » Sun Jul 06, 2008 8:43 pm

take top and bottom hoses of the rad,
put hose pipe in top hose and flush out the bottom,

also put hose into top of rad and flush that out, and also disconect the heater pipes and flush the heater matrix,
Regards Tony C (COOPS)
Image
MS2 V3.57 Ecu mapable efi and wasted spark ignition.
Rotrex C38-91 supercharger and Cossie RS500 Intercooler @ 14psi of Boost.
Sponsored by: www.extraefi.co.uk & www.interpart.biz & www.caprisport.com
Web site: http://www.capriracing.co.uk

Post Reply