Capri Technical Forum:

I have a rattle that i cant source coming form my steering wheel. Its doing my box in now cos i can pinpoint the noise to the bit at which the wheel bolts to the column but nothing appears loose. It doesn't matter whether i pull push or wiggle the streering wheel. Its always there:? Its like water t...

Found this by accident

http://www.picsearch.com/info.cgi?q=for ... 26cols%3D5

Don't know if this helps cos never used one but I'm pretty sure its basically a single rail version of bullet box (2000e) so assuming power levels similar. Same input shaft etc. Think i read this in Burton mag if anyone can confirm.

Good point CSR. I did give them a paraniod extra turn just in case. Hope the rain holds off for Saturday then! Cheers for advice. Thanks for the Torque settings capri turbo.

Thanks for the reply! Seated springs correctley and torqued on ground, although I didn't put the rubber covers on the new springs. Surely that can't be it? Why didn't the new springs come with them. I tried to pull the old ones off but came to the conclusion that they were bonded on as they wouldn't...

Hi all, I've just fitted -1" springs to my laser and they seem to keep jumping and mis-aligning the steering as you turn the wheel. Is this a common thing and is there a simple solution?

Brilliant bortaf. Thanks!!!!!!!!!!!!!!!!!!!!!!!

It was suggested to me that it could be something to do with a diode(s) that are in the alternator and/or regulator when i had a similar problem with battery drain. It is the charge light you are refering to.

Hi all, I maybe opening a can of worms for myself but here goes. I have a granada head, dizzy, computer and fuel pump/accumulator etc along with a 2.8 tank to make my 2.0mk3 fuel injected. I'm slightly confused how the ignition works and does anyone have a wiring diagram for it as i'm baffled and do...

Hi all. Radiator brackets finally fell off so need new rad and was thinking why not go bigger with electric fan already fitted. Does anyone know of a fan/rad combo that will fit straight into mk3 2.0 without any major mods?

Just done mine. If you open it half way back and give a sharp tug on the liner it will pop off. Gently pull it forward and wind back sunroof and it will come out with a little wiggle. You can then see the screws for front and rear rigging. Just be carefull when you put the lining back in cos i rippe...

Excellent. Cheers for that

Just thought i'd check cos they less than a year old and the ball joint rubbers have split. Cheers, Danny

Hi all, does anyone know if the ball joint can be replaced on the TCA without replacing the whole arm? Danny.

That will be next move i think