Search found 4 matches

by karl
Tue May 19, 2009 9:52 am
Forum: Cooling Area
Topic: Quick one on water pump.
Replies: 1
Views: 8243

Quick one on water pump.

Got a 3.0l thats been sat for a few years and the water pump had siezed. Managed to get it turning again by using a oil filter change chain wraped round it. Got a problem now that its dripping water out a hole in the bottom of the casting. Have the seals gone somewhere, can I just block the hole or ...
by karl
Sun May 17, 2009 5:37 pm
Forum: Exhaust, Cylinder Heads, Fuel And Intake Area
Topic: HOLLEY 0-8007 carbs
Replies: 4
Views: 11580

Hi, Yeah did the petrol down the barrels and it tries to splutter, also gives a squirt when full throttle is applied. I got a feeling its blocked jets. will see if I can get them out without taking the carb off :)
by karl
Sun May 17, 2009 8:27 am
Forum: Exhaust, Cylinder Heads, Fuel And Intake Area
Topic: HOLLEY 0-8007 carbs
Replies: 4
Views: 11580

I found that the bowls looked dry cos the car was on the p*ss, petrol is filling the bowls and you get a squirt into the primary barrels when the accelerator arm is pushed full on, still seams like no petrol geting past the jets, how do you get into them and is there one for each of the barrels / Ch...
by karl
Thu May 14, 2009 9:27 pm
Forum: Exhaust, Cylinder Heads, Fuel And Intake Area
Topic: HOLLEY 0-8007 carbs
Replies: 4
Views: 11580

HOLLEY 0-8007 carbs

Got a set of these fitted to a V6 thats been sat for a few years, fuel in OK from pump but no petrol from the fuel level plug on both bowls/sides, what sould be taken apart first ? :?:
Cheers
Karl.